Rosco #5711 Chroma Key Green Paint Rosco #5711 Chroma Key Green Paint Price range: $124.00 through $565.00
Dust-Off Dust-Off Price range: $10.57 through $17.75

Rosco Flamex PC – Paper & Cardboard – 1 Gallon

$105.00

Roscoflamex PC was formulated specifically to treat the many paper products commonly used in props and scenery construction. Most paper products without a wax coating, polyurethane, or other similar water resistant properties can be effectively treated.

In stock

Running low!
Shipping Policy
Spend $100 on qualifying new items for free shipping.

If your cart contains the following, it will be local pickup only: Seamless, Sandbags, Paint, Sheet Goods.

Used equipment can be picked up in LA or SF. Please check the description. If you want used equipment transferred for pickup, expect to wait up to two weeks. Used equipment does not qualify for free shipping.

Used Equipment
Our used equipment is tested in accordance with our QC standards for outbound rentals. Used equipment is sold as-is and may have cosmetic and other defects that do not alter the primary functionality. Used equipment should be tested at pickup and once it leaves our facility it is final sale. Shipped equipment is exchangeable only for 5 days after receipt. Exchanges other than those required for a non-functioning item will be denied.

Downloads

Spec Sheet

Fire Certificate

Safety Data Sheet

Using Roscoflamex PC

Roscoflamex PC has been premixed and does not require any further dilution. The method of application and the amount of Roscoflamex PC required for sufficient treatment varies with the materials in use. Some discoloration and wrinkling of paper products may occur as the paper materials dry. Multiple light treatments will minimize this.

Coverage

One gallon of Roscoflamex PC will treat approximately 400 square feet (37 square meters) of 90lb paper. Usage will vary with weight and thickness of material.

Applying Roscoflamex PC

  • Dipping: This is the most efficient method of impregnation. Immerse completely for ten minutes, and hang to dry.
  • Brushing: Using a wide lay-in brush, brush the Flamex solution into the fibers of the material being treated. Brush in the solution using a criss-crossing pattern to insure adequate absorption.
  • Spraying: In a spray application, it is very important that an adequate amount of the Flamex be absorbed. In calculating the amount of solution needed, remember that a substantial portion of the spray will not fall on the fabric. Use a Hudson-type sprayer with a medium nozzle setting. For best results, hang the material to be treated and spray in a back and forth pattern starting at the bottom and working your way up to the top of the fabric sample.

Certification and Testing

Roscoflamex PC has been approved for use by the California State Fire Marshall #C-25001 and FDNY Fire Marshall COA #5809 and has been tested according to NFPA 701.

Storage

Store Flamex products in non-metallic containers. When metal sprayers are used, they should be thoroughly cleaned immediately after use, including nozzles and accessories. Avoid use of metal buckets or paint containers when possible.

Disclaimer

Read carefully the instructions supplied with any Flamex product. Rosco offers these products in good faith, but without guarantee of any type, since materials treated and methods of application are beyond the control of the manufacturer. You should determine suitability of the Flamex product for the intended use and always test before using.

Roscoflamex PC is a new formulation designed to effectively treat paper and cardboard products used in props and scenery. Do not intermix old and new Flamex products. Use to treat:

  • Letters
  • Copier paper
  • Newspapers and magazines
  • Paper trash and packaging
  • Matte board, cardstock

Additional information

Weight 9.18 lbs
Dimensions 6 × 6 × 12 in
SKU: 112838 Categories: , , Brand:

Related products